Skip to content (Press Enter)

skyboo.net

Month: April 2018

bcm2835_i2c is the new i2c module on RPi kernels

Hello. Yesterday I’ve updated the kernel on my RPi from 4.4.11+ to 4.14.31+. Unfortunately the i2c stopped working despite the module bcm2708_i2c loaded. Trying to add the ds2482 with command: echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device gives ‘no such file or directory’ error. I reported this …

Read More
linux, raspberrypiLeave a Comment on bcm2835_i2c is the new i2c module on RPi kernelsApril 1, 2018May 30, 2018 By manio

Recent Posts

  • Huawei SUN2000: why using a USB dongle for monitoring is not a good idea
  • How to do a firmware upgrade using FusionSolar
  • How to connect to SUN2000 from DD-WRT
  • Huawei SUN2000 monitoring
  • My Skymax inverter died…

Recent Comments

  • manio on Huawei SUN2000: why using a USB dongle for monitoring is not a good idea
  • manio on Connecting DeDietrich MCR3 to PC via serial connection
  • manio on Raspberry Pi 1-Wire tests, DS2482-800
  • dmlk on Connecting DeDietrich MCR3 to PC via serial connection
  • felixd on Raspberry Pi 1-Wire tests, DS2482-800

Archives

  • February 2022
  • September 2021
  • July 2021
  • June 2021
  • July 2020
  • April 2020
  • March 2019
  • October 2018
  • May 2018
  • April 2018
  • July 2017
  • April 2017
  • March 2017
  • February 2017

Categories

  • Uncategorized

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Copyright © 2023 skyboo.net. Book Landing Page | Developed By Rara Theme. Powered by WordPress.